Ongard OG10 240V Mains Powered Ionisation Smoke Alarm

SKU
OG10
Special Price $45.00 RRP $49.00 | Save 9%

Stock Availability

Available to Order  Ready in 1 week

Ongard OG10 240V Mains Powered Ionisation Smoke Alarm

SKU#:
OG10

The Ongard OG10 is a 240V mains powered ionisation smoke alarm that can be interconnected with up to 18 other mains alarms, be they ionisation, photoelectric or heat. Once interconnected, the detection of the relevant danger by an individual unit will sound across all the connected alarms. Ionisation sensing alarms such as the Ongard OG10 may detect invisible fire particles associated with fast flaming fires sooner than photoelectric alarms.

Where to use

Ionisation alarms are for use in areas where there is danger from fast-flaming fires. This mains-powered unit complies with AS 3786:2014 standard and should be installed by a qualified electrician. It can be used throughout the home, except in the kitchen where a Heat alarm is recommended.

About Garland: OnGard

The Ongard Wireless Smoke Alarm enables ANY home to have an interconnected system without laborious and hard-to-reach wiring. Garland Ongard Smoke Alarms are available in three sensing technologies to cater for different environments. Compliant with Australian standards and ActiveFire certified, Garland onGard Smoke Alarms are your trusted choice in fire protection.

Key Features
  • Ionisation sensing technology
  • Sensitive to fast flaming fires
  • 240V mains powered - 9V Alkaline backup battery supplied as standard
  • Interconnectable with up to 18 hard-wired alarms - all alarms sound if danger is detected
  • Alarm memory - identifies source unit within interconnecting network
  • Reduced energy consumption - lower lifetime running costs
  • Dust compensation and bug screen - reduces nuisance alarms
  • Combined Hush/Test button allows regular testing of alarm function and can be used to temporarily silence nuisance alarms
  • Auto reset after activation
  • Tamper-resistant locking device prevents unauthorised removal without the use of a tool
  • 10 Year Warranty
More Information
Product Category Smoke Alarms
SKU OG10
Brand Garland Ongard
Detection Method Ionisation
Alarm Sound 85dB at 3m
Low Battery Indication Unit beeps (chirps) if fault is detected
Alarm Duration As long as smoke is present, unit automatically resets when smoke clears
Alarm Indication LED flashes every 0.5 seconds (Sensing Mode) / 10 seconds (Hush Mode)
Standard Approved and listed to AS3786:2014 Australian standards
Power Requirement 240V mains powered with 9V Alkaline battery back-up
Rating 80mA max per alarm
Overall Height 127mm
Overall Width / Diameter 127mm
Warranty 10 Year Limited Warranty

Ratings & Reviews